
DVCon Europe 2026
- November 17 – 18, 2026
- Munich, Germany
- Organized by Accellera Systems Initiative
Public source
The MIPI C-PHY/D-PHY Combo product page reviewed on 12 November 2026 states that M31 provides silicon-proven C-PHY/D-PHY combo IP that users can configure into D-PHY mode or C-PHY mode, with a PPI interface for Camera Serial Interface (CSI-2) and Display Serial Interface (DSI) controllers.
The official page describes a configurable C-PHY or D-PHY physical layer with a PPI interface for CSI-2 and DSI controllers.
For the C-PHY v2.0 / D-PHY v2.5 feature set, the page states compliance with MIPI D-PHY v2.5 and C-PHY v2.0, support for MIPI DSI and CSI-2, HS rates up to 6 Gbps (6 Gsps) per lane (per trio), LS at 10 Mbps and ultra-low power modes, D-PHY mode with 1 clock lane and up to 4 data lanes, and C-PHY mode up to 3 trios for TX and 4 trios for RX. The page publishes separate TX and RX hard-IP SKUs across process nodes such as TSMC N5A, N7A, 12FFC, 16FFC, 22ULL, 28HPC+, and 40LP, with some ASIL-B variants. An older C-PHY v1.2 / D-PHY v1.2 feature set is also listed. Confirm the exact revision, role, and deliverables on the current provider page before integration.
Published as design IP
Licensable semiconductor IP. This listing is not a finished controller chip.
PHY IP
Physical-layer IP. Controllers are separate listings unless the page states a bundle.
Finder function
MIPI C-PHY/D-PHY combo
Numbered specification: C-PHY v2.0 / D-PHY v2.5
C-PHY v2.0 / D-PHY v2.5 is named for this product on the reviewed page.
Numbered specification: also C-PHY v1.2 / D-PHY v1.2 feature set on same page
also C-PHY v1.2 / D-PHY v1.2 feature set on same page is named for this product on the reviewed page.
Arasan MIPI D-PHY 1.2 Analog Transceiver IP is licensable PHY IP. The page says it can be configured as a transmitter, receiver, or transceiver, with high-speed operation up to 2.5 Gb/s per lane with deskew calibration. CSI-2 and DSI controllers are separate products.
View solutionLicensable design IP. MIPI D-PHY with documented TX-only, RX-only, and combined configurations.
View solutionCurious Camera PHY Interface IP is licensable camera physical-layer and link soft-macro IP. The official English interface page lists MIPI D-PHY (and related camera PHYs) with foundry/node supply tables and separate CSI-2 link soft macros.
View solutionInnosilicon MIPI M-PHY v4.1 IP is licensable physical-layer IP. The official product page states compliance with MIPI M-PHY protocol V4.1 and describes a drop-in PHY with built-in I/O and ESD. Controllers and C/D-PHY combo offerings are separate pages.
View solutionMixel MIPI D-PHY (MXL-DPHY) is licensable PHY IP. The official page describes a physical layer compliant with MIPI D-PHY, delivered as soft digital CIL plus hard mixed-signal views. CSI-2/DSI controllers are separate from this PHY listing.
View solutionArasan MIPI CSI-2 v2.1 Receiver IP is licensable camera receiver controller IP. It is the CSI-2 v2.1 receiver offering. The CSI-2 transmitter and the analog PHY are separate products on Arasan’s MIPI pages.
View solution
